|
|
|
|
|
|
|
|
|
|
|
|
|
|
| WHAT'S NEW | SPECIFICATIONS | CONTACT US | LINKS | SEARCH | BROCHURE | FEEDBACK |
 |
105 Bonnie Drive Butler, PA 16002 800-575-5311 724-283-4681 724-283-5939-fax
|
|
|
Fail-Safe Overspeed Switch |
|
BWI creates a higher standard in overspeed detection for elevators, emergency escape hoists, downhill conveyors and cranes. Introducing the Eagle® Overspeed Monitor - A highly accurate, fail-safe electronic speed switch featuring state of the art circuitry design.
FACTORY PROGRAMMED
No field calibration required. Each unit is factory programmed to the customer's specific trip point.
TRUE TRIP POINT TEST
The two-position test switch precisely simulates a true overspeed or fault condition without operator adjustment or recalibration.
Placing the test switch in the overspeed position internally increases the sensor input signal to the preset trip point and causes the control relay to de-energize.
Placing the switch in the fault position internally shorts the sensor input signal, which simulates a loss of sensor signal, also causing the control relay to de-energize.
RELAY OPERATION
The relay energizes when AC or DC power is applied. If an overspeed or sensor fault condition is detected, the relay de-energizes.
ORDERING INFORMATION
Specify RPM trip point desired. Example: Model 22-4100-327 will trip at 327 RPM
Let the Eagle® Overspeed Monitor prove itself. Use it in your most demanding application. To arrange a trial evaluation, please contact BWI at (724)-283-4681 or e-mail us at : info@bwieagle.com |
|
|
CONTROL MODULE SPECIFICATIONS |
|
|
Enclosure..............................ABS Plastic Power Input........................120 VAC, 8W* Relay Contacts....DP/DT 10amp @120VAC Overspeed Trip Point..........(1 - 2000 RPM) User Specified RPM Accuracy...........................+/- 0.4% Repeatability..............................+/- 0/1%
* DC Input Models Available Dual Speed Models Available
|
|
|
FEATURES |
|
|
Fail-Safe | Easy InstallationFactory Set Calibration
No Potentiometer Adjustments
|
|
CONTROL UNIT OPTIONS |
|||
|
22-4100 SERIES |
|||
|
|
MODEL |
RPM TRIP POINT |
SPECS |
|
22-4100-150-DC |
150 RPM TRIP, 9-36VDC POWERED |
||
|
22-4100-175-DC |
175 RPM TRIP, 9-36VDC POWERED |
||
|
22-4100-225-DC |
225 RPM TRIP, 9-36VDC POWERED |
||
|
22-4100-250 |
250 RPM TRIP, 120VAC POWERED |
||
|
22-4100-250-30S-DC |
250 RPM TRIP, 30SECOND TIME LAPSE, 9-36VDC POWERED |
||
|
22-4100-260-30S-DC |
260 RPM TRIP, 30 SECOND TIME LAPSE, 9-36VDC POWERED |
||
|
22-4100-500 |
500 RPM TRIP, 120VAC POWERED |
||
|
22-4100-1760-DC |
1760 RPM TRIP, 9-36VDC POWERED |
||
|
22-4100-XXXX |
Specify RPM TRIP POINT when ordering (AC) |
||
|
22-4100-XXXX-DC |
Specify RPM TRIP POINT when ordering (DC) |
||
|
Notes - RPMs are based on one sensor target per revolution Contact BWI for speed ranges not shown (See 22-4100-XXXX above) - Example: Model 22-4100-327 will trip at 327 RPM |
|||
|
SENSOR OPTIONS |
|||||
|
REPRESENTATIVE |
MOUNTING STYLE |
MODEL |
SPEED RANGE |
FEATURES |
SPECS |
 |
General |
10-7135 |
1 - 2000 RPM |
A, B 50 Ft. Cable |
|
 |
Conduit Compatible |
10-7136 |
1 - 2000 RPM |
A, C 3 Ft. Cable |
|
 |
Threaded Barrel |
10-7139 |
1 - 2000 RPM |
A, D 3 Ft. Cable |
|
|
|
Notes: A. LED on sensor barrel pulses to indicate C. PVC Threaded 1" M-NPT compatible with proper distance, alignment with target. standard conduit hardware.
B. U-Bold & bracket mounting D. Threaded barrel & lock-nut bracket.
Intrinsically Safe Sensor & Zener Barrier option available - See I.S. Speed Switches |
||||
