|
|
|
|
|
|
|
|
|
|
|
|
|
|
| WHAT'S NEW | SPECIFICATIONS | CONTACT US | LINKS | SEARCH | BROCHURE | FEEDBACK |
 |
105 Bonnie Drive Butler, PA 16002 800-575-5311 724-283-4681 724-283-5939-fax |
|
|
Converts Shaft Speed to to Self-Powered Analog 4-20mA Signal Reports Directly to PLC, Date-Logger, Digital Display... |
|
The Eagle® Tac-monitor is a proportional speed monitor that converts rotating shaft speed to an analog 4-20mA output signal. Interfaced with the customer's PLC, the Tac-monitor is a proven, cost-effective device for virtually any speed monitoring requirement.
Encased in durable ABS plastic, the small, but rugged control module mounts conveniently inside electrical panels and OEM control compartments. The non-contacting proximity sensor, available in three mounting styles, is unaffected by material build-up and hostile environments. Immune to electrical and RF interference, the sensor may be remotely located up to 10,000 feet from the control unit, using standard 2-wire unshielded cable.
Installation is quick, easy and precise. Light emitting diodes (LEDs) on the control module and sensor head aid installation and troubleshooting. No field calibration is necessary - the control module is factory calibrated.
The Tac-Monitor fulfills a wide variety of industrial applications. One such application: conveyors with variable speed drives are commonly governed by ramp-up timers. Should slippage occur during the critical ramp-up period, the conveyor is unprotected and subject to serious damage. The result is very often costly, hard-to-recover downtime. The Tac-Monitor, by contrast, continuously monitors the conveyor from beginning ramp-up through normal operating speed, providing total protection and control.
Let the Eagle® Tac-Monitor prove itself. Use it in your most demanding application. To arrange a trial evaluation, please contact BWI at (724)-283-4681 or e-mail us at : info@bwieagle.com |
|
|
CONTROL MODULE SPECIFICATIONS |
|
|
Enclosure..................................ABS Plastic Power Input..........................120 VAC, 10W* Power Output...........Proportional 4-20mA DC Linearity................................Better than 1% Accuracy..............................Better than 1% Repeatability.......................Better than 0.5%
* DC Input Models Available
|
|
|
TYPICAL APPLICATIONS |
|
Booster Drive/Main Drive SynchronizationTrue-Slip Monitoring
Conveyors | Crushers | Fans
|
|
CONTROL UNIT OPTIONS |
|||
|
22-8100 SERIES |
|||
|
|
MODEL |
SPEED RANGE |
SPECS |
|
22-8100-100 |
10 - 100 RPM |
||
|
22-8100-225 |
10 - 220 RPM |
||
|
22-8100-350 |
10 - 350 RPM |
||
|
22-8100-500 |
10 - 500 RPM |
||
|
22-8100-2000 |
10 - 2000 RPM |
||
|
22-8100-6000 |
10 - 6000 RPM |
||
|
22-8100-8000 |
10 - 8000 RPM |
||
|
22-8100-XXXX |
Specify RPM when ordering |
|
|
|
Notes - RPMs are based on one sensor target per revolution Contact BWI for speed ranges not shown (See 22-8100-XXXX above) |
|||
|
SENSOR OPTIONS |
|||||
|
REPRESENTATIVE |
MOUNTING STYLE |
MODEL |
SPEED RANGE |
FEATURES |
SPECS |
 |
General |
10-7135 |
1 - 2000 RPM |
A, B 50 Ft. Cable |
|
 |
Conduit Compatible |
10-7136 |
1 - 2000 RPM |
A, C 3 Ft. Cable |
|
 |
Threaded Barrel |
10-7139 |
1 - 2000 RPM |
A, D 3 Ft. Cable |
|
|
|
Notes: A. LED on sensor barrel pulses to indicate C. PVC Threaded 1" M-NPT compatible with proper distance, alignment with target. standard conduit hardware.
B. U-Bold & bracket mounting D. Threaded barrel & lock-nut bracket.
Intrinsically Safe Sensor & Zener Barrier option available - See I.S. Speed Switches |
||||
