|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The tools below will help you to specify the proper model for your application |
|
RPM CALCULATOR |
Insert belt
speed and roller diameter, then hit
"Calculate". Use "Reset" to clear your inputs.
When entering roller diameter, make
sure you enter the ROLLER O.D.- NOT The
SHAFT
Diameter.
| BWI Speed Switch - SPEED RANGES | |||||
|---|---|---|---|---|---|
| Unit | ALS-6 Series | ALS-15 Series | ALS-25 Series | Standard Speed | -2000 Series |
| Speed Range | 6-60 RPM | 15-100 RPM | 25-200 RPM | 60-800 RPM | 200-2000 RPM |
|
NOTE: We DO NOT suggest using odd numbers of targets. Misalignment of targets can lead to improper operation.
Notice that the RPM that the unit Counts is doubled with 2 and quadrupled with 4 targets. Use more than one target only if you need to get up to a certain speed range.
|
 |
Page last updated on Wednesday August 16, 2006
